This gorgeous tree by Clive Maddison is inspired by a Cedar of Lebanon Tree and set on a Sapele wood base.

It is a unique handmade item with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium and copper wire. It has no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

Clive has used a total of 395 metres of approximately 16500 loops of wire within this piece.

The tree is mounted on a solid base of Sapele wood.

Dimensions*

• Full Height: 67cm

• Full Width (widest point): 36cm

• Base Height: 7.5cm

• Base: 26×26cm

  *Dimensions measured by hand. Allow for a discrepancy of 1 - 2 cm

This gorgeous tree by Clive Maddison is inspired by a Cedar of Lebanon Tree and set on a Sapele wood base.

It is a unique handmade item with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium and copper wire. It has no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

Clive has used a total of 395 metres of approximately 16500 loops of wire within this piece.

The tree is mounted on a solid base of Sapele wood.

Dimensions*

• Full Height: 40cm

• Full Width (widest point): 30cm

• Base Height: 6.5cm

• Base Diameter: 21 cm

  *Dimensions measured by hand. Allow for a discrepancy of 1 - 2 cm

A unique handmade tree with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium wire. There is no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

The tree is mounted on a solid round base of Limed Oak.

Dimensions*

• Full Height: 57cm

• Full Width (widest point): 34cm

• Base Height: 5m

• Base: 30 cm dia

  *Dimensions measured by hand please allow for a small error.

A unique handmade tree with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium wire. There is no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

The tree is mounted on a solid round base of spalted beech wood.

Dimensions*

• Full Height: 35cm

• Full Width (widest point): 28cm

• Base Height: 5m

• Base: 24 cm dia

  *Dimensions measured by hand please allow for a small error.

A unique handmade tree with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium wire. There is no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

The tree is mounted on a solid round base of Saple.

Dimensions*

• Full Height: 36cm

• Full Width (widest point): 26cm

• Base Height: 5m

• Base: 19 cm dia

  *Dimensions measured by hand please allow for a small error.

A unique handmade tree with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium wire. There is no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

The tree is mounted on a solid base of spalted beech wood.

Dimensions*

• Full Height: 50cm

• Full Width (widest point): 34cm

• Base Height: 30m

• Base: 8×8cm

  *Dimensions measured by hand please allow for a small error.

This gorgeous tree by Clive Maddison is inspired by a Poplar Tree and set on an Oak wood base.

It is a unique handmade item with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium wire. It has no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

Clive has used a total of 192 metres of approximately 8000loops of wire within this piece.

The tree is mounted on a solid base of Sapele wood.

Dimensions*

• Full Height: 31cm

• Full Width (widest point): 21cm

• Base Height: 18m

• Base Diameter: 2cm

  *Dimensions measured by hand. Allow for a discrepancy of 1 - 2 cm

This gorgeous tree by Clive Maddison is inspired by a Willow Tree and set on an Oak wood base.

It is a unique handmade item with each strand of wire running from the roots through to the leaves. The canopy of leaves is made from loops of aluminium wire. It has no other additional wiring, glue, solder, or any other means of support and the sculpture is self supporting through the twisting method used which holds it together.

Clive has used a total of 312 metres of wire within this piece.

The tree is mounted on a solid base of Oak wood.

Dimensions*

• Full Height: 42cm

• Full Width (widest point): 29cm

• Base Height: 24m

• Base Diameter: 3cm

  *Dimensions measured by hand. Allow for a discrepancy of 1 - 2 cm

A lovely bronze mouse asleep in a conker by David Meredith . The mouse and conker are individual pieces so you can take the mouse out. Please note each one is individual and their might be slight differences in the outer colouring of the conker.

Dimensions*:

• Height: 3.25cm

• Length: 12.25cm

• Width: 6.5cm

• Mouse Diameter: 3.25cm

• Weight: 241g

*Measured by hand; please allow for a small error.

A stunning bronze sculpture of a Kingfisher by David Meredith.

Dimensions*:

• Full Height: 32cm

• Width: 14cm

• Depth: 9cm

• Base Circumference: 9cm

*Measured by hand, please allow 1-2cm error.

Bronze mice asleep in a bronze conker, a lovely piece by David Meredith. The mice and conker are individual pieces so you can take the mouse out. And the top piece can be placed over the mice to close the conker. Please note each one is individual and their might be slight differences in the outer colouring of the conker.

Dimensions*:

• Height (to end of stem): 7cm

• Length: 12cm

• Width: 7cm

• Mouse Diameter: 3.5cm

*Measured by hand; please allow for a small error.

A gorgeous bronze sculpture of blue tits on a ring by David Meredith.

Dimensions*:

• Full Height: 20cm

• Width: 21cm

• Depth: 12cm

• BaseLength: 13cm

*Measured by hand, please allow 1-2cm error.

A gorgeous bronze Wren by David Meredith. Edition of 250.

Dimensions*:

• Full Height: 42cm

• Width: 10cm

• Depth: 10cm

*Measured by hand, please allow 1-2cm error.

An all bronze gorgeous Barn Owl at Rest by David Meredith. This stunning piece truly captures the quiet majesty of the barn owl.

Dimensions*:

• Full Height: 40cm

• Owl Height (head to tail tip) 12.5 cm

• Base, 9×9 cm

*Measured by hand, please allow for a small error.

A stunning bronze sculpture of a group of long tailed tits by David Meredith. An edition of 75, signed and numbered.

Dimensions*:

• Full Height: 38.5cm

• Width: 32cm

• Depth: 11cm

• Base Circumference: 9cm

*Measured by hand, please allow 1-2cm error.

Bronze sitting hare by David Meredith.

Dimensions*:

• Height: 25cm

• Width at base: 14cm

*Measured by hand, please allow 1-2cm error

An individually hand built dynamic silhouette kingfisher in mixed media - copper rich epoxy resin with an exposed brass armature, copper bill and legs in copper and ink tinted finish. The little birds are sitting on hazel branches, inserted into an antiqued gilt and brown frame.

Makers mark on the back of the frame.

Dimensions*:

• Frame Width: 16.5cm

• Frame Height: 16.5cm

• Sculpture: 7×7 cm

• Depth: 3cm

*Measured by hand; please allow for a small error.

An individually hand built dynamic silhouette kingfisher in mixed media - copper rich epoxy resin with an exposed brass armature, copper bill and legs in copper and ink tinted finish. The little birds are sitting on hazel branches, inserted into an antiqued gilt and brown frame.

Makers mark on the back of the frame.

Dimensions*:

• Frame Width: 16.5cm

• Frame Height: 16.5cm

• Sculpture: 7×7 cm

• Depth: 3cm

*Measured by hand; please allow for a small error.

‘Navigator’ is a one-off remarkable hand crafted sculpture by Robin Fox

Robin is self taught, and uses an interesting process. The artist uses a Ferro Cement method where layers are applied over an armature of steel mesh. This medium allows the artist to build up and carve away. The piece is set into a concrete base.

Full Height 130cm

Full Width: 70cm

Full Depth:21cm

Robin Fox’s mark on base.

Please note due to the size of this piece please enquire regarding shipping.

‘Pigeon Toed Cockatoo’ is a one-off remarkable hand crafted sculpture by Northumberland based sculptor Robin Fox.

An individually handbuilt abstract figure and cockatoo in mixed media. The figure is built over a steel armature, covered with bronze modified Ferro cement and epoxy resin and all in a variegated patination with Verdigris and oxidised and painted finish.

The sculpture has been finished with layers of varnish and renaissance wax.

Dimensions:

Figure Height: 110cm

Figure Width: 31cm

Figure Depth: 24cm

Base Diameter: 25cm

Robin Fox’s makers mark on base.

‘Propelled’ is a one-off remarkable hand crafted sculpture by Northumberland based sculptor Robin Fox and a wonderful centrepiece to his “Rings, Wings and Curious Things” exhibition.

The inspiration behind this piece is drawn from the artists own childhood memories of wanting to fly - big ideas with little wings, always trying to defy convention without really understanding why. The winged feet were a later conception to the piece, as were the finger operated guide wires. The propeller is constructed from repurposed decorative ironwork with hints of a timepiece which gives the idea of motion and moving forward in time. A mix of ‘those magnificent men in their flying machines”, an inventive nature and clever imagination.

Patinated bronze finish epoxy resin and steel, hand-built over a steel armature with the flying machine made of steel, wood and wire repurposed components. The piece is set on a sandstone base with a steel base plate. The stone has been quarried from Ladycross Quarry in Northumberland. The stone shows detailed layers throughout, Robin visits the quarry and carefully chooses the stone for each piece that he feels best matches the sculpture itself.

Dimensions

Full Height: 120cm

Figure Height: 73cm

Figure Width: 90cm

Figure Depth (widest point): 37cm

Base Height: 43cm

Base Width: 20cm

Base Depth: 10cm

Robin Fox’s makers mark on base.

‘Ascension’ is a one-off remarkable hand crafted sculpture by Robin Fox

Robin is self taught, and uses an interesting process. The artist uses a Ferro Cement method where layers are applied over an armature of steel mesh. This medium allows the artist to build up and carve away. The piece is set into a concrete base.

Full Height 130cm

Full Width: 30cm

Full Depth:21cm

Robin Fox’s mark on base.

Please note due to the size of this piece please enquire regarding shipping.